Select margins options, Print on loaded paper – HP Designjet T3500 Production eMFP User Manual

Page 89

Advertising

Use the Mac OS X printer driver

Go to the Page Setup dialog.

NOTE:

If your application offers no Page Setup dialog, please use the Print dialog.

Select Paper Size > Manage Custom Sizes.

Use the Embedded Web Server

Go to the Submit Job page.

Select Advanced settings > Paper > Page size > Custom.

Select margins options

By default, the printer leaves a 3 mm margin between the edges of your image and the edges of the paper
(increased to 17 mm at the foot of cut-sheet paper), this value can be changed in the advance tab, margin
option.

However, you can change this behavior in several ways.

●

In the Windows driver dialog: select the Paper/Quality tab and then the Margins/Layout button.

●

In the Mac OS X Print dialog: select the Margins/Layout panel.

●

On the Embedded Web Server's Submit Job page: select Advanced settings > Paper > Layout/
Margins.

You will then see at least some of the following options.

NOTE:

Under Mac OS X, the available margins options depend on the paper size selected. For instance, for

borderless printing you must select a paper size name that includes the words “no margins”.

●

Standard. Your image will be printed on a page of the size you have selected, with a narrow margin
between the edges of the image and the edges of the paper. The image should be small enough to fit
between the margins.

●

Oversize. Your image will be printed on a page slightly larger than the size you have selected. If you cut
off the margins, you will be left with a page of the size you selected, with no margins remaining
between your image and the edges of the paper.

●

Clip Contents By Margins. Your image will be printed on a page of the size you have selected, with a
narrow margin between the edges of the image and the edges of the paper. In this case, if the image is
the same size as the page, the printer assumes that the extreme edges of the image are either white or
unimportant, and do not need to be printed. This may be useful when your image already contains a
border.

●

Borderless. Your image will be printed on a page of the size you have selected, with no margins. The
image is slightly enlarged to ensure that no margin is left between the edges of the image and the
edges of the paper. If you select Automatically by Printer, this enlargement is done automatically. If
you select Manually in Application, you must select a custom page size slightly larger than the page on
which you intend to print. See also