Installing a hot-plug power supply, Installing a hot-plug power supply -10 – HP ProLiant DL760 Server User Manual
Page 113
5-10 Compaq ProLiant DL760 Servers User Guide
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: f-ch5 Installing Hardware Options - Hot Pluggable.doc Last Saved On: 1/18/01 6:12 PM
Installing a Hot-Plug Power Supply
The ProLiant DL760 server ships with either one or two hot-plug power
supplies depending on the model. The system power in the ProLiant DL760
server does not have to be shut off to replace one of the power supplies.
WARNING: To reduce the risk of electric shock or damage to the equipment:
■
Install the power supply before connecting the power cord to the power
supply.
■
Unplug the power cord before removing the power supply from the server.
To replace a hot-plug power supply with the system power on:
1. Remove the power cord from the power supply to be replaced and
release the power cord clamp.
Figure 5-6. Removing power cord