Installing the remote insight lights-out edition – HP ProLiant DL760 Server User Manual
Page 96
4-22 Compaq ProLiant DL760 Servers User Guide
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: e-ch4 Installing Hardware Options - Server Power Off.doc Last Saved On: 1/25/01 9:33 AM
Installing the Remote Insight Lights-Out
Edition
The Remote Insight Lights-Out Edition should be installed into slot 9 of the
server with the adapter cable connected to it.
1. If you have not powered up the server for the first time, skip to step 4. If
you have powered up the server, back up your server data.
2. Shut down the operating system as directed in your operating system
instructions.
3. Power down the server and disconnect the power cables.
4. Open the top access panel as shown in Chapter 3, “Server Access.”
5. Press on the top of the slot 9 release lever
and open the lever toward
the rear of the expansion slot
.
6. Remove the expansion slot cover
.
7. Open the air baffle
.
2
4
3
1
Figure 4-18. Preparing the expansion slot for installation