HP ProLiant DL760 Server - Manual (Page 55)

Installing the Server in a Rack 2-21
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: c-ch2 Installing the Server in a Rack.doc Last Saved On: 1/24/01 4:46 PM
Inserting Cage Nuts into the Rack Frame
The cage nuts fit inside the rails at the marked locations.
1. Use the cage nut fitting tool to insert a cage nut into the rails. Squeeze
the prongs together
and insert the cage nut into the appropriate hole in
the rack
.
2
1
1
Figure 2-11. Inserting cage nuts
2. Repeat step 1 for all of the cage nuts on the front and the back rails of
the rack. Also mark where the top of the template is on the rack. This
helps align the components to be installed next.