HP ProLiant DL760 Server - Manual (Page 57)

Installing the Server in a Rack 2-23
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: c-ch2 Installing the Server in a Rack.doc Last Saved On: 1/24/01 4:46 PM
3. Secure the back of each mounting bracket on the outside of the back of
the rack with one cage nut and one M6 x 1.0-12L Phillips screw in the
bottom hole of the bracket as shown in Figure 2-13.
IMPORTANT: Make sure that the mounting bracket is level from front to back. Use one
screw only in the bottom hole of the bracket; otherwise, proper alignment is impossible.
Figure 2-13. Attaching the slide rail assembly to the back of the rack