HP ProLiant DL760 Server - Manual (Page 114)

Installing Hardware Options - Hot Pluggable 5-11
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: f-ch5 Installing Hardware Options - Hot Pluggable.doc Last Saved On: 1/18/01 6:12 PM
2. Squeeze upward on the release in the middle of the power supply
handle

.
3. Rotate the power supply handle down
 and slide the supply out of the
chassis
, as shown in Figure 5-7.
NOTE: When you remove the power supply, a spring-loaded trap door will close to block
the opening. This door preserves the air path required to cool the internal components of
the server.
1
2
3
Figure 5-7. Removing a power supply
4. Remove the protective covers from the connector on the new power
supply. See the installation documentation that came with the power
supply for more information. Keep the protective covers for future
handling.
5. Lower the handle on the new hot-plug power supply.