HP ProLiant DL760 Server User Manual
Page 78
4-4 Compaq ProLiant DL760 Servers User Guide
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: e-ch4 Installing Hardware Options - Server Power Off.doc Last Saved On: 1/25/01 9:33 AM
When adding processors of these speeds, be aware of the following guidelines:
CAUTION: The server will NOT boot if the Intel Pentium III Xeon processors are
NOT the same speed.
■
You must install the processors starting from slot 1.
■
Each pair of processor slots must contain processors of the same cache
size. Processor slot pairs are slots 1, 2; slots 3, 4; slots 5, 6; and
slots 7, 8.
■
You must install processor terminator boards in all unpopulated
processor slots.
■
Install the processor pair with the lowest cache size into slots 1 and 2. If
a second pair of processors has a larger cache size, install them in the
next pair of slots.
For more details about your server’s processor requirements, refer to the server
access label and the Compaq website:
http://www.compaq.com/products/servers/platforms