HP ProLiant DL760 Server - Manual (Page 23)

Server Features 1-7
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/24/01 4:43 PM
PCI Hot Plug
PCI Hot Plug provides the ability to remove, replace, upgrade, and add
PCI/PCI-X expansion boards without powering down the server. Any
PCI/PCI-X board can be placed in a PCI Hot Plug slot. PCI Hot Plug device
drivers and operating system support, however, are required to enable PCI
Hot Plug.
The PCI Hot Plug button allows for PCI Hot Plug access directly at each
PCI/PCI-X slot. A PCI Hot Plug button is located above each PCI/PCI-X slot,
providing PCI Hot Plug control directly at the server without the use of the
PCI Hot Plug utility software.
For more information about PCI Hot Plug, refer to the Server
Documentation CD.
Disk Controller
The Compaq ProLiant DL760 server is provided with a Dual Channel
Integrated Smart Array Controller. One channel is dedicated to the internal
drive bay and the other channel is connected to the external SCSI connector.
See Chapter 8, “Configuring the Server,” for descriptions of the features and
array setup procedures for these controllers
.
Internal Hot-Plug Drive Bays
The internal hot-plug drive bays support four 1-inch, Ultra3 hard drives.
Drives may be of any storage capacity, but must be mounted on Compaq
universal drive carriers (hot-plug drive trays).
Internal drives are controlled by a Dual Channel Integrated Smart Array
Controller. See Chapter 8, “Configuring the Server,” for a description of the
integrated controller.
Fixed Internal Media Drive Bays
The fixed internal media drive bays support two non-hot-plug media drives:
■ 1.44-MB diskette drive
■ IDE CD-ROM drive