HP ProLiant DL760 Server - Manual (Page 72)

Server Access 3-9
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: d-ch3 Server Access.doc Last Saved On: 1/24/01 4:48 PM
Removing the Media Module
CAUTION: Do not attempt to open any of the three modules while power is
applied to the system. They are not hot-pluggable. Immediate system shutdown
and data loss will occur.
To remove the media module:
1. If the server is on, place it in Standby mode and disconnect the power
cord or cords. See Chapter 7, “Server Power.”
2. Push in the sides of the cam levers on the media module

and rotate
the top of the levers downward , as shown in Figure 3-8.
3. Pull the media module out of the chassis until it makes contact with the
module stop latch
.
1
2
3
Figure 3-8. Opening the media module