HP ProLiant DL760 Server User Manual
Page 79
Installing Hardware Options - Server Power Off 4-5
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: e-ch4 Installing Hardware Options - Server Power Off.doc Last Saved On: 1/25/01 9:33 AM
To install a Processor Power Module and a Pentium III Xeon processor in the
Processor and Memory Module, refer to one of the following installation
sources:
■
For a text and illustrated procedure, refer to the documentation provided
with the option kit.
■
For an illustrated overview of the procedure, refer to the quick
installation poster included in the shipping box or to the Processor
Board Configuration label located on the left side of the Processor and
Memory Module.
■
For an overview of processor installation, see the procedure below.
1. If the server is on, place it in Standby mode.
2. Remove the Processor and Memory Module. See Chapter 3, “Server
Access,” for instructions.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
3. Locate the first available processor socket adjacent to an installed
processor. Available sockets will have a processor terminator board
installed.
1
2
Figure 4-3. Two processors installed in sockets
and