HP ProLiant DL760 Server - Manual (Page 151)

Configuring the Server 8-3
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: i-ch8 Configuring the Server.doc Last Saved On: 1/18/01 5:59 PM
The location of the external VHDCI SCSI connector

for Port 1 is shown in
Figure 8-1.
1
Figure 8-1. External VHDCI SCSI Connector (tape port)
To use a SCSI controller other than the integrated controller for the internal
hard drives, you can bypass the internal controller using the Integrated Array
Bypass Kit and an optional controller such as the Compaq 4200 Array
Controller. See “Installing the Integrated Array Bypass” in Chapter 5 for
installation instructions.
For external RAID support, use an array controller such as the Compaq 4200
Array Controller.
The Option ROM-based Array Configuration Utility (ACU) helps you
configure the hardware to suit your needs.
CAUTION: Back up your data any time you move drive arrays or change your
configuration.