HP ProLiant DL760 Server - Manual (Page 138)

Cabling the Server 6-3
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: g-ch6 Cabling the Server.doc Last Saved On: 1/18/01 5:28 PM
2. Secure the AC cord with the retention clip provided on the power
supply, as shown in Figure 6-2, to prevent the cord from being
accidentally disengaged.
Figure 6-2. Securing the power cord with the clip provided
WARNING: To reduce the risk of electric shock or damage to the equipment:
■ Install the power supply before connecting the power cord to the power
supply.
■ Unplug the power cord before removing the power supply from the server.
■ If the system has multiple power supplies, disconnect power from the
system by unplugging all power cords from the power supplies.
■ Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
■ Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
WARNING: To reduce the risk of electrical shock or fire, do not plug
telecommunications/telephone connectors into the Network Interface
Card (NIC) receptacles.