HP ProLiant DL760 Server - Manual (Page 210)

Troubleshooting Information E-11
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173744-001 File Name: o-appe Troubleshooting Information.doc Last Saved On: 1/25/01 3:06 PM
Table E-5
Are all of the System Interconnect Status LED Indicators Off?
continued
Answer Possible Reasons The Next Step
Yes There is a broken connection between the
system board and power switch.
A power supply problem may exist. The
power supply may not be connected or
inserted properly, may have a damaged
connector, or it may have failed.
The power supply backplane may need to be
replaced.
There is a broken cable connection between
the system and backplane.
■ Check your power source to verify an
adequate supply of AC power.
■ Remove the power supply and check
for a damaged connector. If
connector appears okay, reinsert the
power supply, firmly and correctly.
■ Check for bent pins on all power
cables.
■ Verify the proper connection of all
power cables.
Refer to “Power Problems” and “General
Hardware Problems” in the Compaq
Servers Troubleshooting Guide for further
options.