HP LaserJet M4345 Multifunction Printer series - Manual (Page 107)

3. Touch Default Copy Options .
4. Touch Staple/Collate .
5. Touch Staple .
6. Touch the staple option you want to use.
NOTE Selecting the stapler at the printer control panel changes the default setting to Staple .
It is possible that all print jobs will be stapled. However, settings that are changed in the
printer driver override settings that are changed at the control panel.
Select the stapler in the printer driver for printed jobs (Windows)
NOTE The following procedure changes the default setting to staple all print jobs.
1. Open the printer driver. See Open the printer drivers . Look for the column with the heading "To
change the print job default settings."
2. On the Output tab, click the drop-down list under Staple, and click One Staple Angled.
NOTE You can create a Quick Set that has the appropriate settings.
Select the stapler in the printer driver for printed jobs (Mac)
Select the stapler by creating a new preset in the printer driver.
1. Open the printer driver. See Open the printer drivers . Look for the column with the heading "To
change the print job default settings," and follow the instructions for the operating system that
you are using.
2. Create the new preset.
Set the stapler at the control panel for all copy jobs
NOTE The following procedure changes the default setting for all copy jobs.
1. Scroll to and touch Administration .
2. Touch Default Job Options .
3. Touch Default Copy Options .
4. Touch Staple/Collate .
5. Touch Staple .
6. Touch the staple option you want to use.
ENWW Use the stapler 95