HP LaserJet M4345 Multifunction Printer series - Manual (Page 61)

Print Quality menu
NOTE Values shown with "(default)" are the factory-default values. Some menu items have
no default.
Table 2-15 Print Quality menu
Menu item Sub-menu item Values Description
Set Registration Test Page Print (button) Use Set Registration to shift the margin alignment to
center the image on the page from top to bottom and
from left to right. You can also align the image on the
front with the image printed on the back.
Print a test page for setting the registration.
Source All trays
Tray <X>: <contents>
(choose a tray)
Select the source input tray for printing the Set
Registration page.
Adjust Tray <X> Shift from -20 to 20
along the X or Y axes.
0
is the default.
Perform the alignment procedure for each tray.
When it creates an image, the device scans across
the page from side to side as the sheet feeds from
top to bottom into the device.
The scan direction is referred to as X. X1 is the scan
direction for the first side of a 2-sided page. X2 is the
scan direction for the second side of a 2-sided page.
The feed direction is referred to as Y.
Fuser Modes <Paper Type> Configure the fuser mode associated with each
media type.
Restore Modes Restore (button) Restore the fuser modes to the default settings.
Optimize High Transfer Normal (default)
Increased
Optimizes certain parameters for all jobs rather than
(or in addition to) optimizing by paper path.
Line Detail Off (default)
On
Resolution 300
600
FastRes 1200 (default)
ProRes 1200
Use this feature to select the print resolution.
REt Off
Light
Medium (default)
Dark
Enable Resolution Enhancement technology (REt),
which produces print output with smooth angles,
curves, and edges. All print resolutions, including
FastRes 1200, benefit from REt.
Economode Enabled
Disabled
When Economode is enabled, the device prints with
a reduced amount of toner per page; however, the
print quality of the page is slightly reduced.
ENWW Print Quality menu 49