Declaration of conformity, 258 appendix d regulatory information enww – HP LaserJet M4345 Multifunction Printer series User Manual

Page 270

Advertising
background image

Declaration of conformity

Declaration of Conformity

according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name:

Hewlett-Packard Company

Manufacturer's Address:

11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA

declares, that the product

Product Name:

HP LaserJet M4345 series

Regulatory Model Number

3)

:

BOISB-0407-00 and BOISB-0407-01

Including: CB425A, CB426A, CB427A, CB428A, BOISB-030800

4

Product Options:

ALL

Toner Cartridges: Q5945A

conforms to the following Product Specifications:

Safety:

IEC 60950-1:2001 / EN60950-1: 2001 +A11
IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)
GB4943-2001

EMC:

CISPR 22:1993 +A1 +A2 / EN 55022:1994 +A1 +A2 -- Class B

1)

EN 61000-3-2:2000
EN 61000-3-3:1995 +A1
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class B

2

/ ICES-003, Issue 4

2)

GB9254-1998, GB17625.1-2003

Supplementary Information:

The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and
carries the CE-Marking accordingly.

1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.

2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product
name or the product number(s).

4) All worldwide modular approvals for analog fax accessory obtained by Hewlett-Packard under the regulatory model number
BOISB-030800 incorporate the Multi-Tech Systems MT5634SMI Socket Modem Module.

Boise, Idaho , USA

March 29, 2006

For regulatory topics only:

Australia Contact:

Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia

European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards

Europe, Herrenberger Strasse 140, D-71034 Bblingen, Germany, (FAX: +49-7031-14-3143)

USA Contact:

Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, ID 83707-0015, USA,
(Phone: 208-396-6000)

258

Appendix D Regulatory information

ENWW

Advertising