HP LaserJet M4345 Multifunction Printer series - Manual (Page 123)

Print on both sides manually
1. Insert enough paper into one of the trays to accommodate the print job. If you are loading
special paper such as letterhead, load it in one of the following ways:
● For tray 1, load the letterhead paper with the front side up, bottom-edge first.
● For all other trays, load letterhead paper with front side down, and the top edge at the back
of the tray.
CAUTION To avoid jams, do not load paper that is heavier than 105 g/m 2 (28 lb bond).
2. Open the printer driver (see Open the printer drivers ).
3. On the Finishing tab, select Print on Both Sides (manually).
4. Click OK.
5. Send the print job to the product. Follow the instructions in the pop-up window that appears
before feeding the output stack into tray 1 for printing the second half.
6. Go to the product. Remove any blank paper that is in tray 1. Insert the printed stack with the
printed side up, and the bottom-edge feeding into the product first. You must print the second
side from tray 1.
7. If prompted, press a control-panel button to continue.
Layout options for printing on both sides
The four duplex orientation options are shown here. To select option 1 or 4, select Flip Pages Up in
the printer driver.
2
3
5
2 5
3
3
5
2
3
5
2
1 2 3 4
ENWW Use features in the Windows printer driver 111