HP LaserJet M4345 Multifunction Printer series - Manual (Page 40)

Default Print Options
Use this menu to set default options for jobs that are sent from a computer.
Table 2-6 Default Print Options menu
Menu item Sub-menu item Values Description
Copies Per Job Type a value. Use this feature to set the default number of copies
for print jobs.
Default Paper Size (List of supported sizes.) Choose a paper size.
Default Custom Paper
Size Unit of measure Millimeters
Inches
Configure the default paper size that is used when
the user selects
Custom as the paper size for a print
job.
X Dimension Configure the width measurement for the Default
Custom Paper Size .
Y Dimension Configure the height measurement for the Default
Custom Paper Size .
Output Bin Output Bin <binname> Select the default output bin, if applicable, for print
jobs.
Paper Path Face-up (straightest path)
Face-down (correct order)
Select the default paper path for print jobs.
Print Sides 1-sided
2-sided
Use this feature to select whether print jobs should
be single-sided or double-sided by default.
2-Sided Format Book style
Flip style
Use this feature to configure the default style for 2-
sided print jobs. If
Book style is selected, the back
side of the page is printed the right way up. This
option is for print jobs that are bound along the left
edge. If
Flip style is selected, the back side of the
page is printed upside-down. This option is for print
jobs that are bound along the top edge.
28 Chapter 2 Control Panel ENWW