HP LaserJet M4345 Multifunction Printer series - Manual (Page 213)

7. If you can see the jammed media, but neither the leading edge nor the trailing edge is visible,
gently pull on the sides of the sheet of media until one edge becomes free. Then carefully pull
the jammed media out of the fuser.
8. If the media tears as you are removing it, turn the green dial on the fuser, and then carefully pull
out the jammed media. Go to step 13.
9. To remove the fuser-entrance guide, push inward at the left edge to free the left-side alignment
pin. Then lift up slightly on the fuser-entrance guide, and remove it from the device. Place your
forefingers on the blue levers on the bottom of each side of the fuser. Place your thumbs on the
grip points on the top of each side of the fuser. Squeeze the blue levers up, and remove the
fuser from the device.
10. Open the black cover at the top of the fuser, and remove the jammed media.
11. Reinstall the fuser. Push on the fuser with your thumbs to be sure it snaps securely into place.
ENWW Clear jams 201