HP LaserJet M4345 Multifunction Printer series - Manual (Page 212)

2. If you are using the standard output bin, grasp the handle at the bottom of the output-bin
assembly, and pull it out and then up to remove it.
3. If you are using a 3-bin mailbox or a stapler/stacker, remove any media that is stacked, and
then press and hold the release button on the top of the device. Pull the device away from the
device.
4. Remove the optional duplexer or the duplex cover.
5. If you cannot see the jammed media inside the fuser, skip to step 9.
6. If you can see either the leading edge or the trailing edge of the jammed media inside the fuser,
carefully pull it out.
200 Chapter 11 Problem solving ENWW