HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 108)

108 5 - M ANAGING HP EFS WAN A CCELERATOR M ANAGER S ETTINGS
Setting Network Parameters
This section describes how to configure the local network parameters for the HP EFS
WAN Accelerator Manager.
This section includes the following topics:
‹ “Changing the Host Name,” next
‹ “Modifying Settings for the Primary Interface” on page 109
‹ “Configuring Static Networking Routing” on page 110
‹ “Setting the Domain Name Service” on page 111
‹ “Setting the Host Name” on page 112
Changing the
Host Name
You change the host name for the HP EFS WAN Accelerator Manager in the
Networking - Hostname page.
During the initial configuration of the HP EFS WAN Accelerator Manager, you
assigned a host name. Modify your settings in the Hostname page.
To change the host
name 1. Click the Setup Manager tab to expand the Setup Manager menu and display the
Networking - Hostname page.
Figure 5-1. Setup Manager: Networking, Name & Interfaces Page
2. Replace the name in the Hostname text box with the new host name.
3. Click Apply to apply the setting to the running configuration.
When you apply page settings, the values are applied to the running configuration
but not saved permanently. The Save Configuration icon displays a flashing
orange arrow to remind you to save your configuration.
4. To save the settings permanently, click Save.
To revert to the running configuration, click Reset.