HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 78)

78 3 - S ETTING U P R EMOTE HP EFS WAN A CCELERATORS
Setting the
Primary Interface You modify settings for the remote HP EFS WAN Accelerator primary interface in the
Primary Interface page.
NOTE: If you completed the installation wizard when you initially set up the remote appliance,
you already set this parameter. If you chose to complete the appliance configuration through the
HP EFS WAN Accelerator Manager when you initially set up the remote appliance, you must
set the interface settings as described below to complete the remote appliance configuration.
To set the primary
interface 1. Click the Setup Appliances tab to expand the Setup Appliances menu.
2. Click Appliance Specific in the left menu to expand the Appliance Specific
configuration menu.
3. Click Interface: Primary in the left menu to display the Primary Interface page.
Figure 3-25. Setup Appliances: Primary Interface Page