HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 30)

30 2 - I NSTALLING AND C ONFIGURING THE HP EFS WAN A CCELERATOR M ANAGER
Logging in to the HP EFS WAN Accelerator
Manager
This section describes how to log in to the HP EFS WAN Accelerator Manager.
You can connect to the HP EFS WAN Accelerator Manager through any supported
Web browser. To connect to the HP EFS WAN Accelerator Manager you must know
the host, domain, and administrator password that you assigned during the initial setup
of the HP EFS WAN Accelerator Manager.
NOTE: Cookies and Javascript must be enabled in your browser.
To log in to the HP EFS
WAN Accelerator
Manager 1. Enter the URL for the HP EFS WAN Accelerator Manager in the location box of
your browser:
protocol://host.domain
protocol is http or https. The secure Hypertext Transport Protocol (HTTPS)
uses Secure Sockets Layer (SSL) protocol to ensure a secure environment. If you
use HTTPS to connect you are prompted to inspect and verify the SSL key.
host is the host name you assigned the HP EFS WAN Accelerator Manager during
initial configuration. If your DNS server maps that IP address to a name, you can
specify the DNS name.
domain is the full domain name for the HP EFS WAN Accelerator Manager.
NOTE: Alternatively, you can specify the IP address instead of the host and domain. For
example: http://169.254.169.254/.
The HP EFS WAN Accelerator Manager graphical user interface appears,
displaying the Login page.
Figure 2-4. Login Page