HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 171)

HP EFS WAN A CCELERATOR M ANAGER U SER ’ S G UIDE 171
A - HP
EFS W
A
N
A
C
C
EL
ER
ATO
R
M
ANA
GER
Example
minna (config) # username admin password xyzzzZ
minna (config) #
username password 0
Description Sets the password for the specified user. The password must be a minimum of 6
characters.The password is returned in cleartext format on the command line.
Syntax username <userid> password 0 <password>
Parameters
Example minna (config) # username admin password 0 xyzzzZ
minna (config) #
username password 7
Description Sets the password for the specified user. The password must be a minimum of 6
characters. The password is returned in hash format on the command line.
Syntax username <userid> password 7 <password>
Parameters
Example minna (config) # username admin password 7 xyzzzZ
minna (config) #
NTP, Clock, and Time Zone Commands
This section describes the Network Time Protocol (NTP), clock, and time zone
commands for the HP EFS WAN Accelerator Manager. It contains the following
commands:
‹ “clock set,” next
‹ “clock timezone” on page 172
‹ “ntpdate” on page 173
‹ “ntp disable” on page 173
‹ “ntp enable” on page 173
<userid> Specifies the user login: admin or monitor.
<password> Specifies the password. The password must be a minimum of 6
characters.
<userid> Specifies the user login: admin or monitor.
<password> Specifies the password. The password must be a minimum of 6
characters.