HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 170)

170 A - HP EFS WAN A CCELERATOR M ANAGER C OMMAND -L INE I NTERFACE
Example
minna (config) # ssh server listen interface 10.1.1.1, 10.0.0.4
minna (config) #
User Accounts Commands
This section describes user account commands for the HP EFS WAN Accelerator
Manager. It contains the following commands:
‹ “username nopassword” on page 170
‹ “username password” on page 170
‹ “username password 0” on page 171
‹ “username password 7” on page 171
‹ “NTP, Clock, and Time Zone Commands” on page 171
There are two accounts: one with full privileges (admin), and one with privileges for
reading all data and performing all actions, but not for changing any configuration
(monitor).
username nopassword
Description Disables password protection for a user. The no command option re-enables the
specified user account.
Syntax username <userid> nopassword
Parameters
Example
minna (config) # username monitor nopassword
minna (config) #
username password
Description Sets the password for the specified user. The password must be a minimum of 6
characters. The password is returned in cleartext format on the command line.
Syntax username <userid> password <cleartext>
Parameters
<userid> Specifies the user login: admin or monitor.
<userid> Specifies the user login: admin or monitor.
<cleartext> Specifies the password. The password must be a minimum of 6
characters.