HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 143)

HP EFS WAN A CCELERATOR M ANAGER U SER ’ S G UIDE 143
6 -
D
IS
PL
AY
ING
AND
C
U
S
TO
M
IZI
N
G
HP EF
S
W
A
N
2. Use the controls to customize the report, as described in the following table.
Displaying
Throughput
Reports
You display and customize the Throughput report in the Throughput page.
The Throughput report provides the following statistics that describe data activity for
the application and the time period you specify.
What This Report
Tells You The Throughput report answers the following questions:
‹ What was the peak throughput?
‹ At what time did the peak throughput occur?
Control Description
Period Select Last Hour, Last Day, Last Week, or Last Month from the Period drop-down
list.
Traffic Select Bi-directional, WAN-to-LAN, or LAN-to-WAN from the drop-down list.
Application Select FTP, HTTP, CIFS:NetBIOS, CIFS:TCP, or MAPI from the drop-down list. The
default value is All.
Appliances The default is to include all appliances. To set a custom group, click All and use the
dialog box to select an appliance, a group, or a custom selection of appliances to include
in the report.
Refresh Set a rate to refresh the report display:
• To refresh your report every 15 seconds, click 15s.
• To refresh your report every 30 seconds, click 30s.
• To turn off refresh, click off.
Note: The refresh rate does not affect polling. Polling occurs every 5 minutes.
Printer icon To print your report, click the Printer icon in the upper right corner of the page.
Field Description
Peak Throughput Over Last
Week Specifies the peak data transmitted.
Peak Throughput Occured At Specifies when the peak data activity occurred.