HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 69)

HP EFS WAN A CCELERATOR M ANAGER U SER ’ S G UIDE 69
3 -
S
ET
TI
N
G
U
P
R
EM
O
T
E
HP
EF
S W
A
N A
CC
ELE
RAT
OR
S
TIP: If the group list contains groups, click the link in the Group column to examine the group
configuration and determine whether an existing group suits your needs. If so, you do not need
to configure a new group. If not, continue with the procedures in this section.
3. Use the Add New Group controls to create a new group and add it to the group list,
as described in the following table.
4. To save the settings permanently, click Save.
To revert to the running configuration, click Reset.
Associating
Profiles with
Groups
You associate profiles with groups in the Appliance Group: <GroupName> page.
You can associate more than one profile with a group. For example, you might create
a configuration group for CIFS support and associate two profiles with it: a profile that
defines basic settings and a profile that defines CIFS-specific settings.
When you associate a profile with a group, any new appliances added to the group are
configured with the profile settings.
IMPORTANT: Associating a profile with a group does not associate that profile with HP EFS
WAN Accelerators already registered with that group. To associate a profile with these
appliances, modify the appliance registration, as described in
“Modifying Registration Settings”
on page 74 .
Control Description
Name Type a descriptive name for the profile.
Enable auto configuration? Click this box to enable auto-configuration for new appliances.
Enable backups? Click this box to enable backups.
Enable configuration pushes? Click this box to enable remote appliances to receive automatic updates whenever their
configuration is changed with the HP EFS WAN Accelerator Manager.
Comment Type a description of the group if you want the description to appear in the group list.
Add Group To add the group to the group list, click Add Group.
Remove Selected Groups To remove group names from the list, click the check box next to the group and click
Remove Selected Groups.