HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 64)

64 3 - S ETTING U P R EMOTE HP EFS WAN A CCELERATORS
Managing
Profiles
This section describes how to manage the profile list and how to add additional CLI
commands to a profile. It includes the following topics:
‹ “Displaying the Profile List,” next
‹ “Adding CLI Commands to a Profile” on page 64
Displaying the
Profile List You display the profile list in the Profiles page.
To display the profile
list 1. Click the Setup Appliances tab to expand the Setup Appliances menu.
2. Click Profiles in the left menu to display the Profiles page.
Figure 3-16. Setup Appliances: Profiles Page
TIP: To remove a profile from the Profiles list, click the check box next to the entry and click
Remove Selected Profiles.
Adding CLI
Commands to a
Profile You add additional CLI commands to a profile in the Profile: <Profile Name> page.
When you configure a profile using the HP EFS WAN Accelerator Manager, the HP
EFS WAN Accelerator Manager profile creates all the CLI commands you need to
send to the remote appliance. This feature allows you to send additional commands to
the remote appliance when the particular profile is sent.