HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 66)

66 3 - S ETTING U P R EMOTE HP EFS WAN A CCELERATORS
Sending
Profiles
You send the profile settings to HP EFS WAN Accelerator groups in the Send Profiles
page.
You send profile settings to an appliance group whenever you modify the profile
settings. Profile settings do not take effect on a group until they are sent.
To send profile
settings to groups 1. Click the Setup Appliances tab to expand the Setup Appliances menu.
2. Click Send Profiles in the left menu to display the Send Profiles page.
Figure 3-18. Setup Appliances: Send Profiles Page
3. Use the controls to select the profile to send, set target appliances, and schedule the
job, as described in the following table.
Control Description
Select Profiles Profiles List. Select the profile you want to send from the drop-down list.
Add. Click Add to add the profile to the Selected Profile list.
Remove Selected. To remove a profile from the Selected Profile list, click the check box
next to the name and click Remove Selected.