HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 167)

HP EFS WAN A CCELERATOR M ANAGER U SER ’ S G UIDE 167
A - HP
EFS W
A
N
A
C
C
EL
ER
ATO
R
M
ANA
GER
Parameters None
Example minna # disable
minna >
enable
Description Enters privileged-mode.
Syntax enable
Parameters None
Example minna > enable
minna #
exit
Description Exits the CLI when in non-privileged-mode; exits privileged mode when in privileged
mode; exits configuration-mode when in configuration mode.
Syntax exit
Parameters None
Example minna (config) # exit
minna #
Secure Shell Server Commands
This sections describes the Secure Shell (ssh) server commands for the HP EFS WAN
Accelerator Manager. It contains the following commands:
‹ “ssh server enable,” next
‹ “ssh server enable” on page 167
‹ “show ssh server” on page 168
‹ “ssh client generate identity user” on page 168
‹ “ssh client user authorized-key rsakey sshv2” on page 168
‹ “ssh server listen enable” on page 169
‹ “ssh server listen interface” on page 169
ssh server enable
Description Enables an ssh server. The no command option disables the ssh server. If the ssh
server is disabled, the CLI is only accessible over the serial console. Note that this