HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 122)

122 5 - M ANAGING HP EFS WAN A CCELERATOR M ANAGER S ETTINGS
To set remote logging 1. Click the Setup Manager tab to expand the Setup Manager menu.
2. Click Logging in the left menu to expand the Logging menu.
3. Click Remote to display the Logging - Remote page.
Figure 5-12. Setup Manager: Logging - Remote Page
4. Use the controls to set-up remote logging for a profile, as described in the
following table.
5. To save the settings permanently, click Save.
To revert to the running configuration, click Reset.
Setting the HP EFS WAN Accelerator
Manager Date and Time
This section describes how to set the date, time, time zone, and Network Time Protocol
(NTP) servers for the HP EFS WAN Accelerator Manager.
By default, the HP EFS WAN Accelerator Manager clock is set according to your
network defaults.
This section includes the following topics:
‹ “Setting the Date and Time,” next
‹ “Setting NTP Servers” on page 123
Control Description
Server IP Type the IP address for the server on which to maintain the syslog.
Minimum Severity Select a severity level from the drop-down list.
Add Server Click Add Server to add the remote server to the Remote Syslog Server list.
Remove Selected Servers To remove a server from the Remote Syslog Server list, click the check box next to the
entry and click Remove Selected Servers.