Vaisala WXT520 - Manual (Page 101)

Chapter 7 __________________________________________________ Getting the Data Messages
VAISALA_______________________________________________________________________ 99
Example of the XDR Query (all parameters of each sensor enabled
and NMEA wind formatter set to T):
$--WIQ,XDR*2D<cr><lf>
Example of the response when all the parameters of each sensor are
enabled (NMEA wind formatter set to T):
Wind sensor data
$WIXDR,A,302,D,0,A,320,D,1,A,330,D,2,S,0.1,M,0,S,0.2,M,1,S,0.2,
M,2*57<cr><lf>
P, T, and RH data
$WIXDR,C,23.3,C,0,C,24.0,C,1,H,50.1,P,0,P,1009.5,H,
0*75<cr><lf>
Precipitation data
$WIXDR,V,0.02,M,0,Z,30,s,0,R,2.7,M,0,V,0.0,M,1,Z,0,s,1,R,0.0,M,1,
R,6.3,M,2,R,0.0,M,3*51<cr><lf>
Supervisor data
$WIXDR,C,20.4,C,2,U,12.0,N,0,U,12.5,V,1,U,3.460,V,2,G,HEL/
___,,4*2D
Internal temperature 1
Relative humidity 0
Rain accumulation 0
Rain duration 0
Rain current intensity 0
Hail accumulation 1
Hail duration 1
Hail current intensity 1
Rain peak intensity 2
Hail peak intensity 3
Heating temperature 2
Supply voltage 0
Heating voltage 1
3.5 V reference voltage 2
Information field 4
Table 7 Transducer IDs of the Measurement Parameters
(Continued)
Measurement Transducer ID