Wiring using the 8-pin m12 connector, External wiring, Figure 22 – Vaisala WXT520 User Manual
Page 48: Pins of 8-pin m12 connector, Table 1
User’s Guide ______________________________________________________________________
46 __________________________________________________________________ M210906EN-C
Wiring Using the 8-pin M12 Connector
External Wiring
The 8-pin M12 connector is located on the bottom of the transmitter, see
. The pins of the 8-pin M12 connector as seen from
outside the transmitter are illustrated in the following figure.
0308-032
Figure 22
Pins of 8-pin M12 Connector
The pin connections for the 8-pin M12 connector and the wire colors of
the respective M12 cable (optional, 2/10 m) are listed in the table below.
The signal names Data in (RxD) and Data out (TxD) in the table
describe the direction of data flow as seen from WXT520.
The terms "Default wiring" and "RS-422 wiring" refer to the two
internal wiring options, see the diagrams on the next page.
Table 1
Pin-outs for WXT520 Serial Interfaces and Power
Supplies
/------------------ Default wiring ------------------\
RS-422 wiring
Wire Color
M12 Pin#
RS-232
SDI-12
RS-485
RS-422
Blue
7
Data out (TxD) Data in/out (Tx) Data-
Data in (RX-)
Gray
5
-
-
Data+
Data in (RX+)
White
1
Data in (RxD)
Data in/out (Rx) -
Data out (TX-)
Green
3
GND for data
GND for data
-
Data out (TX+)
Pink
6
GND for Vh+
GND for Vh+
GND for Vh+
GND for Vh+
Yellow
4
Vh+ (heating)
Vh+ (heating)
Vh+ (heating)
Vh+ (heating)
Red
8
GND for Vin+
GND for Vin+
GND for Vin+
GND for Vin+
Brown
2
Vin+
(operating)
Vin+
(operating)
Vin+
(operating)
Vin+
(operating)