Installation procedure, Mounting, Mounting to vertical pole mast – Vaisala WXT520 User Manual
Page 36
User’s Guide ______________________________________________________________________
34 __________________________________________________________________ M210906EN-C
Installation Procedure
At the measurement site, WXT520 needs to be mounted, grounded,
aligned, and connected to the data logger and the power source.
Mounting
Weather Transmitter WXT520 can be mounted either onto a vertical
pole mast or onto a horizontal cross arm. When mounting WXT520
onto a pole mast, an optional mounting kit can be used to ease
mounting. When using the optional mounting kit, alignment is needed
only when mounted for the first time.
Each of the mounting options is further described in the following
sections.
Mounting to Vertical Pole Mast
1.
Remove the screw cover and insert WXT520 to the pole mast.
2.
Align the transmitter in such a way that the arrow points to north.
3.
Tighten the fixing screw (provided) and replace the screw cover.
NOTE
Weather Transmitter WXT520 must be installed to an upright, vertical
position.