Wind data message (ar1) – Vaisala WXT520 User Manual
Page 74
User’s Guide ______________________________________________________________________
72 __________________________________________________________________ M210906EN-C
The response:
a<cr><lf>
Example:
0<cr><lf>
0<cr><lf>
Wind Data Message (aR1)
With this command you can request the wind data message.
Command format: aR1<cr><lf>
Example of the response (the parameter set is configurable):
0R1,Dn=236D,Dm=283D,Dx=031D,Sn=0.0M,Sm=1.0M,
Sx=2.2M<cr><lf>
where
a
=
Device address
<cr><lf>
=
Response terminator
where
a
=
Device address
R1
=
Wind message query command
<cr><lf>
=
Command terminator
where
a
=
Device address
R1
=
Wind message query command
Dn
=
Wind direction minimum (D = degrees)
Dm
=
Wind direction average (D = degrees)
Dx
=
Wind direction maximum (D = degrees)
Sn
=
Wind speed minimum (M = m/s)
Sm
=
Wind speed average (M = m/s)
Sx
=
Wind speed maximum (M = m/s)
<cr><lf>
=
Response terminator