Vaisala WXT520 - Manual (Page 26)

User’s Guide ______________________________________________________________________
24 __________________________________________________________________ M210906EN-C
0806-001 Figure 8 Surge Protector (optional)
The following surge protectors are available from Vaisala:
- Vaisala Surge Protector WSP150 is a compact transient
overvoltage suppressor designed for outdoor use. It can be used
with all Vaisala wind and weather instruments. The WSP150
should be installed close to the protected instrument (max 3 m).
- Vaisala Surge Protector WSP152 is designed to be used with
Vaisala WXT transmitters and WMT sensors, to protect the host
PC against surges entering through the USB port. The WSP152
should be installed close to the PC, no further than the USB cable
can reach (1.4 m).
Vaisala recommends using surge protectors when weather instruments
are installed on top of high buildings or masts and in open grounds, that
is, anywhere with an elevated risk of lightning strike. Also use the surge
protectors if your cable length exceeds 30 m or you have unshielded,
open-wire lines.