Red Lion IndustrialPr 6000 Router - Manual (Page 102)

Software User Guide 102
Services Tab
Listening IP Port: Specifies the local IP port on which the SSH server will accept connections. Note: Specifying a value
other than 22 will require proper firewall rules in order to allow connections to the given port. The recommended set‐
ting for this field is 22.
Login Grace Time (seconds): Specifies the amount of time, in seconds, after which the SSH server will disconnect, if
the user has not successfully logged in. The recommended setting for this field is 30.
Maximum Concurrent Connections: Specifies the maximum number of concurrent unauthenticated connections to
the SHH server. Additional connections will be dropped until authentication succeeds, or the Login Grace Time expires
for a connection. The recommended setting for this field is 10.
Allow Root Login: Specifies whether root can log in directly to the SSH server. The recommended setting for this field
is No.
Telnet Server
Enable Telnet Server: Select YES to enable the Telnet Server. Note: Enabling the Telnet Server does not, by default,
allow Telnet data through the firewall. If you have connection problems, please check your firewall settings.
The recommended setting for this field is NO.
• Click SAVE to store the settings for the next reboot, or click APPLY for the settings to take effect immediately.
Selecting Revert, will reset all fields to previously saved defaults.
3.5.8 SSL Connections
The SSL Connections menu item is used to configure the Red Lion router to either act as a Secure Socket Layer (SSL) Client
to receive certificates or as an SSL Server to issue certificates. The SSL Connections tab is sub‐sectioned into the SSL Client
and the SSL Server.
3.5.8.1 SSL Client
The SSL Client menu item is used to configure the Red Lion router to be a SSL client and receive a certificate of authoriza‐
tion from an SSL server to authenticate connections for secure communications.
• Click on the SSL Client menu item and the following dialog window will appear: