Red Lion IndustrialPr 6000 Router - Manual (Page 85)

Software User Guide 85
Network Tab
3.4.6 Static Routes
The Static Routes menu allows you to configure a route to a network through an interface manually.
• Click on the Static Routes menu item and the following dialog window will appear:
To add a Static Route on the Red Lion router:
• Click on the Add button and the dialog window below will appear:
Interface: Select the interface to which the route should be applied by select‐
ing one of the available options from the drop‐down list. The available inter‐
faces varies depending on the particular model of device, as well as the
current configuration, and may include those created as aliases, VPN tunnels.
Use as “Any” Route?: Select whether or not this route should be used as an
“any” route by selecting Yes or No from the provided drop‐down list.
When set to Yes, the route will take effect when a network change event (up/
down) occurs on any interface. For example, if the configured interface is set
to eth0, and the ppp0 interface becomes active, then the route will be reap‐
plied to eth0.