Red Lion IndustrialPr 6000 Router - Manual (Page 125)

Software User Guide 125
Automation Tab
IP Port: Enter a valid port number (1‐65535) to be used to forward the request to on the remote station. It is recom‐
mended that a port number not already used by other system services is chosen. Consult Status‐> Network‐>Socket
Statuses‐>TCP Only for a list of ports currently in use. Please note that a Firewall Allow rule will need to be added for
remote access. (Network‐>Firewall‐>Port Allow/Forwarding Rules‐>Service Access Rules).
• Click on the Finish button to populate the Forwarding Table screen. If more than one forward is needed, click and
repeat the Add button.
• Click on the “Save” button to save the Forwarding configuration in the modbus.xml file. The “Apply” button will
save your settings and apply them immediately. To revert to the previous defaults, click on the “Revert” button.
3.6.3.4 Display Config File
• Click on the Display Config File menu item and the following window will appear:
Configuration File: This option will allow you to import a configuration file to replace your existing Modbus configura‐
tion file. Click on “Select File” button to select your Modbus.xml configuration file on your PC, then click on the Upload
button and once the upload is successful, click on the Import button to replace your existing Modbus.xml configura‐
tion file.
Configure Modbus Configuration File: This option will load the Modbus configuration file into the text box for editing.
The following controls (buttons) are available:
Save ‐ Save the contents of the text box in to the Modbus configuration file.
Stop ‐ Stop the Modbus service, if it is currently running.
Start ‐ Stop the Modbus service, if it is currently running and start them back up.
Refresh ‐ Reload the Modbus configuration file into the text box.
Download ‐ Download the current Modbus configuration file to your PC as "modbus.xml.txt".