Red Lion IndustrialPr 6000 Router - Manual (Page 69)

Software User Guide 69
Network Tab
Original Destination Address (Required): This field holds the address being transformed by NAT, the IP seen by a
remote host. This address may be owned by an interface on this device or an unowned/fake range with a correspond‐
ing route (static or default). One‐to‐one NAT will perform a complete forwarding of all ports on the Original Destina‐
tion IP to a new IP address entered in New Destination. Both fields can be any valid IP. Neither need to be already
present/configured/owned on a local interface of this device. Ports 1‐19 are excluded.
Note: Host Redirect and Service Access rules will apply first, and may prevent certain ports from reaching the New Destination.
New Destination Address (Required): This field holds the real LAN IP of the destination device behind this router.
One‐to‐one NA will perform a complete forwarding of all ports on the Original Destination IP to a new IP address
entered in New Destination. Both fields can be any valid IP. Neither need to be already present/configured/owned on
a local interface of this device. Ports 1‐19 are excluded.
Note: Host Redirect and Service Access rules will apply first, and may prevent certain ports from reaching the New Destination.
Select Protocol: Choose the protocol type for this port’s data. Options are TCP, UDP, All.
Source network via Whitelist: Select a whitelist name from the list of names available in the drop‐down list box pro‐
vided. Whitelists may be viewed/defined via the Network/Firewall/ACL Rules screen.
• Click on the Finish button. You will be returned to the Masquerade/NAT/DMZ Rules dialog window and the NAT
Rules table will now be populated with the recently entered data.
• To delete an existing rule, select it in the table and click on the Delete button. To edit an existing rule, select it in
the table and click on the Edit button.
NAT Range Rules:
• Click on the Add button and the following pop‐up window will appear:
Original Destination Address Start (Required): This field holds the starting address range being transformed by NAT,
the IP’s seen by a remote host.
This address may be owned by an interface on this device, oran unowned/fake range with a corresponding route
(static or default). One‐to‐one NAT Range will perform a complete forwarding of all ports on the starting Original Des‐
tination IP to a starting new IP address entered in the New Destination Address Start field. Both fields can be any valid
IP. Neither need to be already present/configured/owned on a local interface of this device. Ports 1‐19 are excluded.
Note: Host Redirect and Service Access rules will apply first, and may prevent certain ports from reaching the New Destination.