3 out-of-band management, 3 out-of-band, Management – Red Lion IndustrialPr 6000 Router User Manual
Page 164: 3 out‐of‐band management
Software User Guide
164
Advanced Tab
•
To delete an existing item, select it in the table and click on the Delete button. To edit an existing rule, select it in
the table and click on the Edit button.
•
Click on the “Save” button for changes to be saved without activating the interface until you reboot the unit, the
“Apply” button will save your settings and apply them immediately. To revert to the previous defaults, click on the
“Revert” button.
3.7.3
Out‐of‐Band Management
The Out‐of‐Band Management menu item is used to configure the capability of remotely administrating a third‐party
device connected via a serial cable on the Red Lion router.
Note: Please refer to the third‐party device user manual and/or technical support to determine what type of connection is required to
connect with the Red Lion router from the RS232 serial port.
•
Click on the Out‐of‐Band Mgt menu item and the following dialog window will appear: