Red Lion IndustrialPr 6000 Router - Manual (Page 107)

Software User Guide 107
Services Tab
• Click on the Add button and the following dialog window will appear:
Label (Required): Enter a unique name to describe this connection.
SSL Listening IP: Enter the IP to listen on for incoming SSL connections. If not using static IP addresses, it is recom‐
mended to use the Advanced Setup option “Bind Interface for accepting TCP Connections” instead. The recommended
setting for this field is to leave it blank (0.0.0.0) to allow connections from any interface.
SSL Listening Port (Required): Enter the listening port for SSL connections. Please note that this port must be allowed
in the Firewall access rules for any external/untrusted interface. It may be helpful to review the results of Status‐>Net‐
work‐>Socket Statuses‐>TCP Only to confirm that your choice of listening port is not already in use. (Ports under “Local
Address” with a stat of “LISTEN” are in use.)
TCP Destination IP (Required): Enter the IP or Domain Name of the standard TCP server to which you would like to
connect. Use 127.0.0.1 for internal connection use only (gwlnx Protocol Converter, or OOB Encryption Setup).
TCP Destination Port (Required): Enter the Port number of the standard TCP server to which you would like to con‐
nect.
TCP Source Bind IP: Enter the IP to bind for outgoing TCP connections. If not using static IP addresses, it is recom‐
mended to use the Advanced option “Bind Interface for outgoing TCP Connections”. The recommended setting for this
field is to leave it blank for normal operation (no binding).
• Click on the Finish button. You will be returned to the DHCP Relay dialog window and the Remote Servers table
will be populated with the entered data.