Red Lion IndustrialPr 6000 Router - Manual (Page 55)

Software User Guide 55
Network Tab
3.4.2.2 USB
The USB interfaces menu item allows the administrator to configure the USB port of the Red Lion routers to meet their
needs. The default address is set for 192.168.111.1 with the subnet mask of 255.255.255.0
• Click on the USB menu item and the following dialog window will appear:
Enable USB Interface: Select YES to enable the USB interface. The recommended setting for this field if YES if using
this interface.
Enter IP Address: Enter the desired interface IP address in this field. The IP Address identifies a device on a TCP/IP net‐
work. Every device on a network must have a unique address. The range of valid addresses for a given network is
determined by the value of the Netmask. Some addresses are reserved for special uses such as network and broad‐
cast.
For example, if a netmask is 255.255.255.0 and the IP address assigned to the device is 192.168.1.3, then the range of
valid addresses is 192.168.1.1 through 192.168.1.254 as 192.168.1.0 is the value reserved for the network and
192.168.1.255 is the value reserved for the broadcast address.
The IP address should have been provided by your Network Administrator. It must be an address valid for the network
described by the value contained in the Enter Subnet Mask field and must not conflict with any other device on the
target network.
Enter Subnet Mask: Enter the desired Netmask for the interface in the field provided.
Your Network Administrator should be able to provide an appropriate value. This value determines the valid range of
IP addresses allowed in the Enter IP Address field.