Red Lion IndustrialPr 6000 Router - Manual (Page 45)

Software User Guide 45
Network Tab
The Config, Status and Provisioning buttons are a quick way to navigate to the three (3) submenus of the Cellular Connec‐
tion menu.
Enable Interface: Select Yes to enable the interface to become active after the new settings are applied and upon sub‐
sequent system start‐up. Select No to disable the cellular interface and prevent the cellular radio from attempting to
establish a network connection.
Select APN Context: Select the desired APN Context from the provided drop‐down. This information should have been
given to you by your service provider when service was established.
APN: Enter the APN used to access your cellular wireless data service in this field. Note: Entering an APN value in this
field will overwrite any APN stored in the modem for the selected context.
View/Change Advanced Options: Selecting Yes will enable the additional fields listed below.
User Name: Enter the user name assigned to you by your cellular wireless data plan provider. This information should
have been given to you by your service provider when service was established.
Password: Enter the password assigned to you by your cellular wireless data provider. This information should have
been given to you by your service provider when service was established.
Confirm Password: Re‐enter the password entered in the password field, exactly as typed before.
Dial String: Enter the dial string used to access your cellular wireless data service in this field. This information should
have been giving to you by your service provider when service was established. The dial string must be entered in the
form of an AT command string, such as ATDT#777. The recommended setting for this field is to leave it blank.
SIM Unlock PIN Code: Enter the 4 digit SIM Unlock PIN code here. Entering the wrong value multiple times may cause
your SIM to become unusable and require service by your carrier. If you have previously entered this value, but it is
now blank, the PIN was probably rejected by the SIM. Rejected PIN codes are cleared so that they are not attempted
multiple times. Use this option with caution.
RF Radio Region: This option chooses the RF bands to scan for available towers, and sets the PRL Region option in the
module if applicable.