Red Lion IndustrialPr 6000 Router - Manual (Page 115)

Software User Guide 115
Automation Tab
• CLI: The command line interface for the cellular modbus gateway (IndustrialPro) provides a Cisco‐style telnet com‐
mand line interface. It writes an XML configuration file, which is used to drive the backend daemons.
• Web UI: This method is a WEB based interface which is the focus of this documentation.
The user interfaces will have the ability to:
• Configure/Display local station information such as station name and station number.
• Configure/Display serial ports
• Configure/Display remote stations
• Configure/Display I/O transfers
• Configure/Display MODBUS forward stations
• Configure/Display MODBUS registers allocation
3.6.1 Local Station
• Click on the Local Station sub menu item and the following menu will appear:
Station Name (Required): Enter the name of the local station. The station name must be less than or equal to 32 char‐
acters.
Sation Number (Required): Enter the local station number. The station number must be in a range of 1 ‐ 247.
Modbus Local Port (Required): Enter the local port number. The port must be within the range of 1 ‐ 65535 and the
recommended default port is set to 502.
• Click SAVE to store the settings for the next reboot, or click APPLY for the settings to take effect immediately.