RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 136)

136
Pressing the (control stop) key is followed by displaying a message:
Pressing
key causes reutining to the control process in progress. Pressing
key causes terminating the control and returning to settings of the CPG
mode.
Simultaneously, a control report with status < Terminated > is added to the database
of < Controls>.
30.7. Logging out from a control process in progress
Procedure:
• While in control mode perss pictogram with name of the logged operator
located in the bottom bar of the display,
• The operator is automatically logged out and simultaneously a window
<Insert Password>
for logging in is displayed with the name of the
previously logged operator: