RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 212)

212
37.3.2. Colours of cables for I/O
INPUTS OUTPUTS
wire number description wire number description
1 IN 1 6 OUT 1
2 IN 2 7 OUT 2
3 IN 3 8 OUT 3
4 IN 4 9 OUT 4
5 COM GND 10 (yellow - green) COMMON
37.3.3. Installing method in PUE HY indicators
Installing procedure:
1. Unplug the scale from mains;
2. Unscrew and take off the back wall of the housing;
3. Dismount I/O socket and install a gland instead. LED the PT0016
cable through it;
4. Connect the PT0016 cable to the J8 connector for inputs or
to the J6 for outputs, on the main board of PUE HY;
5. Screw down the back wall.
Installing WE4 modules on the main board of PUE HY