RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 74)

74
The bargraph field between the above values gets automatically rescaled
and it is additonally marked by a “magnifier” pictogram visible in graph’s
left corner.
• Signaling mass btween the value of Qn+T and Qn-2T:
• Signalling mass above the set value of Qn+2T:
Caution:
In case of additional declaring the values for MIN, MAX limits, the “control”
bargraph refers to the MIN, MAX limits and the nominal mass, but without
displaying the errors for T and 2T.
18. INPUTS / OUTPUTS
Scale are equipped STANDARD with 3 inputs / 3 outputs. To adjust software
to the users needs configure inputs outputs
in the submenu <
Inputs / Outputs>
:
• indicator inputs,
• indicator outputs.
In order to enter submenu <
Inputs / Outputs>
, press
and then
:
„ Inputs / Outputs”
.
18.1. Configuration of inputs
Procedure:
• Enter <
Inputs / Outputs>
according to ch. 18 of this manual,
Qn
MIN MAX