RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 204)

204
• Packaging - complex command parameter: he value of a code of a
selected packaging.
• Source warehouse - complex command parameter: he value of a code
of a selected source warehouse.
• Destination warehouse
- complex command parameter: he value of
a code of a selected destination warehouse.
• Formulation - complex command parameter: response is the value of
a code of a selected formulation.
Notice:
A command or a a command with a parameter is carried out once on
detecting the setting of a corresponding bit. If it is necessary to repeat a
command with the same bit, then first it has to be zeroed.
Example:
Command address 1 address 0
Tarring 0000 0000 0000 0010
Zeroing command bits 0000 0000 0000 0000
Tarring 0000 0000 0000 0010
37. SPECIFICATION OF ADDITIONAL MODULES
Apart from standard interface, it is possible to equip terminals with additional
module increasing functionality of devices:
• AN -
analogue outputs module,
• PK 1 -
relay outputs module,
• WE 8 -
8 inputs / 8 outputs module,
• DP-2
module for an additional platform.