RADWAG HTY 60/H5/K Multifunctional Scales - Manual (Page 200)

200
Example:
Bit no.
B8 B7 B6 B5 B4 B3 B2 B1 B0
Value 0 0 0 0 1 0 0 1 1
The scale does not report an error, the measurement is stabilized in
the 2nd measuring range.
• LO – response is the value of LO limit in an adjustment unit of a given
weighing platform.
• Process status – determines status of a process
Decimal value of a
variable
Process status
Bit no.
B1 B0
0
Process inactive 0 0
1
Process start 0 1
2
Process stop 1 0
3
Process end 1 1
• Inputs status – response is the status of set inputs
Input no. 12 11 10 9 8 7 6 5 4 3 2 1
OFF 0 0 0 0 0 0 0 0 0 0 0 0
ON 1 1 1 1 1 1 1 1 1 1 1 1
Example:
Mask of set inputs 2 and 4: 0000 0000 0000 1010
• MIN – response is the value of set MIN threshold (in a measuring unit
of an enabled working mode).
• MAX - response is the value of set MAX threshold (in a measuring unit
of an enabled working mode).
• Lot number – response is the value of lot number.
• Operator – response is the value of a logged operator.